Table of Contents
Advertisement
Home Connect
en
oHome Connect
H o m e C o n n e c t
This appliance is WLAN-enabled and settings can be
sent to the appliance via a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as a hob with
no network connection. The hob can always be
operated via the control panel.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country.You can find more information on this at
www.home-connect.com.
Notes
Hobs are not designed to be used unattended - you
■
must always keep an eye on the cooking process.
Ensure that you follow the safety instructions in this
■
instruction manual and that these are also observed
when operating the appliance via the Home Connect
app. You must also follow the instructions in the
Home Connect app.~ "Important safety
information" on page 6
Using the Home Connect app, you can send settings
■
to your appliance and then have to confirm them on
the appliance. It is not possible to operate the
appliance whilst you are away from home.
Operation on the appliance always has priority.
■
During this time, it is not possible to operate the
appliance using the Home Connect app.
Setting up
To implement settings via Home Connect, you must
have installed and set up the Home Connect app on
your mobile device.
Observe the Home Connect documents supplied for
this.
Follow the steps specified by the app to make the
settings.
The app must be open in order to perform the setup
process.
48
Automatic registration in the home network
You require a router that has WPS functionality.
You require access to your router.If you do not have
this, follow the steps for "Manually logging into your
home network".
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the
symbol repeatedly until the
0
3.
setting appears.
lights up on the cooking position display.
‹
Set the
value in the control panel.
‚
4.
In the control panel,
Press the WPS button on the router within the next
5.
two minutes.
If the
symbol no longer flashes in the control
D
panel but, instead, lights up constantly, the hob is
connected to the home network.
Note:
If no connection can be established, the value
"Connect manually" appears. Manually log the
appliance into the home network or restart the
automatic connection.
The appliance automatically tries to connect to the
app and the setting
flashes in the control panel.
Start the app on the mobile device and follow the
6.
instructions for automatic network registration.
The registration procedure has been completed once
the
value appears on the cooking position display.
‹
symbol for four seconds.
0
•'‚
and the symbol
flash.
‚
D
is displayed. The value
•'ƒ
ƒ
‚
Advertisement
Table of Contents
