Table of Contents
Advertisement
Broadcast - cell broadcast (CB) messages
These messages are broadcast by the networks to GSM users and may provide general infor-
mation about local area dialling codes, weather reports, traffic, news, etc. Each type of mes-
sage is numbered, allowing you to select the type of information you wish to receive.
Up to 5 types of messages can be programmed into the selection list.
16 standard message types are pre-programmed into the phone for your selection. New message
types can be programmed into the selection list using the 3 digit cell broadcast type number. Con-
tact your service provider for details about the type of messages they broadcast.
Before you activate the broadcast message service, you must enter at least one message type
in the selection list.
Entering a message type in the selection list
1
Press the [Menu/T9] key. Select Messages.
2
Select Broadcast.
3
Message types
and select one of the empty types ([...]). Select OK.
Select
4
Modify by list
Select
(or
5
Select the message type(s) you wish to receive and select
6
Save
Select
to store your setting.
Activating / deactivating the broadcast service
1
Press the [Menu/T9] key. Select Messages.
2
Select Broadcast.
3
Reception
Select
and select
4
Save
Select
to store your setting.
Reading broadcast messages
Broadcast messages are displayed whilst the phone is on standby. If a broadcast message is received
whilst in conversation or operating the menu, it only becomes visible once the mobile reverts to the
standby display. A message can contain up to 93 characters and may be displayed on several pages.
Options on message display
Press the [Clear] key to clear the CB message displayed. Press the [Call] key to dial the
number contained in the message.
Press Options to display the following menu:
OPTION
ACTION
Delete
To delete the current message
Delete All
To delete all the received CB messages
Numbers &
To display all phone numbers contained in the message text and dial or store
addresses
them in the Phone book if required.
Broadcast Off To deactivate cell broadcast.
Activating/deactivating the alert tone
An alert tone can be set to beep every time a new or updated broadcast message is received.
1
Press the [Menu/T9] key. Select Messages.
2
Select Broadcast.
3
Reception alert
Select
4
Save
Select
to store your setting.
Broadcast language
All the broadcast messages can be displayed in several languages.
To select a language:
1
Press the [Menu/T9] key. Select Messages.
2
Select Broadcast.
3
Language
Select
and select one of the available languages.
4
Save
Select
to store your setting.
The availability of this feature is network dependent.
Modify by code
if the type number is known).
On
or Off.
On
or Off.
and select
Messages/Text editing
29-
Valid.
Advertisement
Table of Contents
