Table of Contents
Advertisement
Rejecting a call
When receiving a phone call:
1
Press the [On/Off] key or close the clamshell to reject the call (the call is then forwarded to
your mailbox).
or:
1
Press and hold the [Camera/Video]
Ending a call
1
Press the [On/Off] key.
You can also end a call by closing the clamshell. Please see "Active flip", page 88.
To stop the ringtone
When receiving a phone call you have the possibility to stop the ringtone.
1
No ring
Press
if the clamshell is open or press the [Menu]
closed.
Holding your mobile (while making or receiving a call)
How to hold
the phone.
When using the hands free mode, do not put the phone to your ear.
The standby display (Main screen)
When switched On, the mobile searches for connection with the network. Once the
connection has been established, a beep sounds and the network and/or service
provider name or logo are displayed together with the time and date, the signal
strength and the battery charge level. If the mobile cannot find a valid network, the
signal strength and the operator name are not displayed.
On the main screen, the four arrows indicate that features can be accessed via
the four arrows on the cursor key.
The oval symbol in the middle of the cursor key indicates that the Camera ap-
plication (short press) and the Video application (long press) can be accessed by pressing the
OK key (in the middle of the cursor key).
Mail and i-mode indicate that you can directly access the mailer and the i-mode service by
pressing the softkeys.
The standby display (External screen)
The provider name as well as the time, the signal strength and the battery charge
levels are also displayed on the external screen when the mobile is activated.
On both screens,
indicates that your mobile is connected to a GPRS network.
side key if the clamshell is closed.
side key if the clamshell is
Avoid
covering the up-
per back of the
phone to allow
maximum emis-
sion and
reception quality.
Getting started
12-
Advertisement
Table of Contents
