Currency Converter; Alarm Clocks - Mitsubishi Electric M430i User Manual

Currency converter

This feature allows currency conversion. The currencies and exchange rates must be entered
prior to use. The conversion is calculated on the per unit exchange rate of the second selected
currency.
To select the currencies and the exchange rate
1 Press the [Menu/T9] key. Select Tools.
2 Currency converter.
Select
3 Select Settings.
4 Enter the first currency name (e.g. Euro). Press OK.
Enter the second currency name (e.g. Dollar). Press OK.
Enter the exchange rate using
5 OK
Press to validate the entry. Press
To calculate the conversion between the selected currencies
1 Press the [Menu/T9] key. Select Tools.
2 Currency converter.
Select
3
Select one of the first two options.
4
Enter the amount to be converted. Press
5 Press OK. The converted amount and the exchange rate information are displayed.

Alarm clocks

This feature allows you to set up to three alarm clocks. These alarms can be set to be played
at different times and to be played once, daily, or on selected days.
To set alarms
1
Press the [Menu/T9] key. Select Tools.
2 Alarm clocks.
Select
3 Alarm 1, Alarm 2
Select
idate the displayed time.
Repetition 2
Select (1, or
(the alarm will be played once only),
Weekdays to choose the required day(s) by pressing OK, then select
time) or
to the Alarm clocks screen. Press
is displayed when reverting to the standby display.
If the phone is off at alarm time, it automatically switches on.
If the phone is locked or if the PIN setting is on, the phone returns to this locked state after the
alarm has rung until you use it again.
If the alarm is acknowledged but not validated after the 3rd (and final) alarm, the alarm indica-
tors remain on the display for up to 15 minutes (the mobile then either goes back its previous
state, 'on' or 'off').
1. If a call is in progress at alarm time a 'Call in progress' alert beep sounds and a visual alert is displayed
every 3 minutes. Validate or acknowledge the alarm in the usual way.
2. If several alarms are set to be played at the same time, the alarm tone is played once only. Any action performed
on the mobile to acknowledge the alarm tone is then applied to all the alarms.
To use the alarm as a Reminder or a Snooze Alarm
1 No ring, or any other key (except
Press
remains on the display and the alarm starts ringing again 3 minutes later.
Valid OK
Or press or to acknowledge the alarm and stop the alarm clock process.
To turn the alarm Off
1
Press the [Menu/T9] key. Select Tools.
2 Alarm clocks.
Select
3 Select Off. Press Save
to confirm the selection.
to enter a decimal point.
Save
to confirm data storage.
to insert a decimal point if needed.
Alarm 3. Select On
or then enter the alarm time or press
3
according to the Alarm you have previously set). Select
Daily
(the alarm will be played every day at the same
Save
to confirm the selection.
Valid. and OK) to snooze the alarm. The alarm icon
Tools
18-
OK
to val-
Once
Valid
to return