Nd Filter - Canon VIXIA GX10 Instruction Manual

ND Filter

ND Filter
Using the ND filter allows you to open up the aperture to obtain a shallower depth of field even when recording in
bright surroundings. You can also use the ND filter to avoid the soft focus caused by diffraction when using small
64
apertures. You can select one of 3 density levels.
You can also change the ND filter remotely using Browser Remote on a connected network device (A 111,
116).
Operating modes:
Press the ND FILTER + or
filter setting.
• Repeatedly pressing ND FILTER + button will change the ND
filter setting in the following order: [ND 1/4]  [ND 1/16] 
[ND 1/64]  ND filter off (no onscreen display).
The ND FILTER
–
order.
• The selected ND filter setting will appear at the left of the screen.
NOTES NOTES
• Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom white
balance (A 65) may be effective in such case.
• About changing the ND filter setting using the optional RC-V100 Remote Controller:
- When the remote controller is connected to the camcorder, you can use the remote controller's ND button in
the same way as the camcorder's ND FILTER + button.
- ND filter indicators 1 to 3 will illuminate in orange when the ND filter is set to 1/4, 1/16 and 1/64, respectively.
button to select the desired ND
–
button cycles through the settings in reverse