Zebra Pattern
You can use the zebra pattern to identify areas that might be overexposed, so you can correct the exposure
appropriately. The camcorder offers two levels of zebra pattern: With 100%, only areas that will lose detail in the
highlight areas will be identified, while 70% will identify also areas that are dangerously close to losing detail.
1 Open the exposure screen.
[FUNC] > [y Exposure]
2 Select the desired zebra level.
] > [z 70%] or [{ 100%] > [X]
[
• To turn off the zebra pattern, touch [
• To return to the exposure screen and change other exposure settings, touch [L] instead of [X].
• The zebra pattern will appear on the overexposed areas of the picture.
NOTES
NOTES
• Displaying the zebra pattern on the camcorder's screen will not affect your recordings.
Off] instead.
Adjusting the Exposure
63