Slow & Fast Motion Recording - Canon VIXIA GX10 Instruction Manual

Slow & Fast Motion Recording
Slow & Fast Motion Recording
You can record clips that have a slow motion or fast motion effect during playback, simply by selecting the
desired slow/fast motion rate (from x0.2 to x1200 the normal speed). Available slow/fast motion rates will vary
depending on the resolution and frame rate currently selected. Sound is not recorded when slow & fast motion
44
recording is activated.
Operating modes:
1 Select [Slow & Fast Motion].
> [3 ! Recording Setup] > [Slow & Fast Motion]
2 Touch the desired slow & fast motion rate and then touch [X].
• Touch [j] to turn off slow & fast motion recording.
• or and the selected rate will appear on the screen.
Available slow/fast motion rates
Resolution
3840x2160 (150 Mbps)
1920x1080 (35 Mbps),
1920x1080 (17 Mbps)
1280x720 (8 Mbps)
1280x720 (4 Mbps)
* The playback bit rate will change automatically to 90 Mbps.
NOTES NOTES
• Slow & fast motion recording cannot be used together with the following functions.
- Dual recording
- Relay recording
• When the slow motion rate is set to x0.5 (59.94P), x0.25 (29.97P) or x0.2 (23.98P), face detection & tracking
cannot be used together with slow & fast motion recording.
• About the time code when slow & fast motion recording is activated:
- The time code mode can be set to [
- If the time code running mode was set to [
automatically to [
- When slow & fast motion recording is turned off, the time code running mode will return to its previous
setting.
- The time code signal cannot be output from the HDMI OUT terminal.
• The maximum continuous recording time of a single clip using slow motion recording is the equivalent of 6
hours of playback time. Consequently, it differs depending on the slow motion rate used. For example, when
the [x0.5] rate is selected, the maximum continuous recording time will be 3 hours (which, played back at x0.5
slow motion, equal 6 hours of playback time).
Frame rate
59.94P x2, x4, x10, x20, x60, x120, x600, x1200
29.97P x0.5*
23.98P x0.8
59.94P x0.5, x2, x4, x10, x20, x60, x120, x600, x1200
29.97P x0.25, x0.5
23.98P x0.2, x0.4, x0.8
59.94P x2, x4, x10, x20, x60, x120, x600, x1200
29.97P x0.5
- Pre-recording
- Color bars
Regen.], or to [
Rec Run] when slow & fast motion recording is activated.
Available slow/fast motion rates
Preset] with [
Free Run], the time code running mode will be changed
Rec Run] running mode.