Canon VIXIA GX10 Instruction Manual page 125

4k camcorder
Table of Contents

Advertisement

Menu item
[File Numbering]
[¡ Audio Setup] menu
Menu item
[Built-in Mic Att.]
[Built-in Mic Wind Screen]
[Built-in Mic Freq. Response]
[Built-in Mic Directionality]
[Audio Limiter]
[Audio Compressor]
[MIC Att.]
[MIC Low Cut]
[MIC ALC Link]
[º Mic Att.]
[Headphone Volume]
[Speaker Volume]
[Notification Sounds]
Setting options and additional information
[m Reset], [n Continuous]
MP4 clips and photos are saved as files in folders. You can select the file numbering method for those
files. File numbers appear on screens in playback mode in a format such as "101-0107". The first 3
digits indicate the folder number and the last 4 digits are different for each file in a folder.
[m Reset]: File numbers will restart from 100-0001 every time you insert a new (or initialized) SD
card. If the card already contains previous recordings, file numbers will continue from the
number following that of the last recording on the SD card.
[n Continuous]: File numbers will continue from the number following that of the last file recorded
with the camcorder. This setting is the most convenient for managing files on a computer. We
recommend using the [n Continuous] setting.
Understanding folder names
• An example folder name is "101_1103". The first 3 digits indicate the folder number (from 100 to
999) and the last 4 digits indicate the month and day when the folder was created. In the example,
the folder numbered 101 was created on November 3.
• Each folder can contain up to 500 files (MP4 clips and photos combined). When that number is
exceeded, a new folder is created automatically.
Understanding file numbers
• An example file number is "101-0107". The first 3 digits indicate the folder number where the clip/
photo is stored and the last 4 digits indicate the consecutive number assigned to the recording
(from 0001 to 9999).
• The file number also indicates the name and location of the file on the SD card. For example, an
MP4 clip numbered 101-0107 that was recorded on November 3, is located in the
"DCIM\101_1103" folder as the file "MVI_0107.MP4"; a photo with the same file number will be
saved in the same folder as the file "IMG_0107.JPG".
Setting options and additional information
[i On], [j Off]
[ Auto (High)], [r Auto (Low) ë], [j Off
[h Normal], [ç Boost LF Range], [è Low Cut Filter],
[é Boost MF Range], [ê Boost HF+LF Range]
[í Monaural], [h Normal], [î Wide]
[i On], [j Off]
[ High], [r Low], [j Off]
[i On], [j Off]
[i On], [j Off]
[
Linked], [
Separated]
[i On], [j Off]
Volume adjustment bar: 0 to 15 (8), [Ô] (softer), [Õ] (louder)
Volume adjustment bar: 0 to 15 (8), [Ø] (softer), [Ù] (louder)
In
mode only, this setting is an alternative way to adjust the built-in speaker's volume (A 92).
[
High Volume], [
Low Volume], [j Off]
A beep will accompany some of the camcorder's operations.
• While pre-recording is activated, the camcorder will not emit any notification sounds.
à
]
Menu Options
125
(A 74)
(A 75)
(A 75)
(A 76)
(A 76)
(A 77)
(A 77)
(A 77)
(A 74)
(A 77)
(A 78)

Advertisement

Table of Contents
loading

Table of Contents