Charging with a PC
To charge with a PC, the microUSB connection cable (sample)
is needed. Make sure the direction to connect them properly.
Attempting to forcibly connect may cause a damage.
With the engraved side up, insert the
microUSB plug of the microUSB connection
cable (sample) straight into the microUSB
connection terminal of the product
Insert USB plug of the microUSB connection
cable (sample) into the USB port of a PC
appears on the status bar.
When charging is finished,
• If the found new hardware screen etc. appears on the PC,
select "キャンセル (Cancel)".
When charging is finished, remove the
microUSB connection cable (sample) from the
product and PC
appears on the status bar.
Charging with Desktop Holder (SCL23PUA)
and specified AC Adapter (sold separately)
Desktop Holder (SCL23PUA) and specified AC Adapter (sold
separately) are required for charging. Charging with Common
AC Adapter 05 (sold separately) is explained.
Contact
terminal
microUSB
connection
terminal
Connect the microUSB plug of Common AC Adapter
05 (sold separately) with the microUSB connection
terminal of Desktop Holder (SCL23PUA)
Confirm the shape of the connector for Common AC Adapter
05 (sold separately) and insert it straight with the engraved
side facing up.
Insert the power plug of Common AC Adapter
05 (sold separately) into an outlet
Fit the charging terminals of the product
with the battery pack installed to the contact
terminals of Desktop Holder (SCL23PUA)
Charging start sound emits, then
bar. When charging ends,
AC 100 V
outlet
Common
AC Adapter 05
(sold separately)
microUSB
plug
appears on the status
appears on the status bar.
37