Be sure to read the following cautions
Caution
before use.
Do not leave the Desktop Holder (SCL23PUA) on the floor.
Doing so might cause injury or accident if they accidentally
step on the holder or fall.
Do not use in humid places such as bath areas, or connect/
disconnect the specified charging equipment (sold separately)
with wet hands. Doing so might cause electric shock, injury or
a fault.
Charge the battery in a stable place especially while the
vibration mode set. If placed on an inclined surface or wobbly
stand, the product might fall causing injury or damage. In
addition, do not cover or wrap the product with a cloth or
bedding. Doing so might cause fire, injury or a fault.
When unplugging the power plug of the specified charging
equipment (sold separately) from the power outlet or cigarette
lighter socket, hold and pull the power plug. If you pull the
cord, the cord might be damaged.
Do not use the Desktop Holder (SCL23PUA) in a car. Doing
so might disturb driving and cause an accident. It is presumed
that the Desktop Holder (SCL23PUA) will be used in the room
and stable place.
14
If you feel any abnormality with your skin, immediately consult
a dermatologist. Itching, rashes, eczema, etc. sometimes
occurs depending on your physical constitution and condition.
The materials of parts used on the Desktop Holder
(SCL23PUA) are as follows.
Part
Exterior case
PC
Contact terminal
Copper
Label
PET/polyester film
Bottom rubber
Urethane rubber
Attachment (main
PC
unit)
Attachment
Neodymium N35H
(magnet)
Do not use the common DC adapter 03 (sold separately) with
the car engine stopped. Doing so might result in draining of
the car battery.
Do not leave the specified charging equipment (sold
separately) connected to the main unit with the battery pack
removed. Doing so might cause fire, injury or electric shock.
■ au Micro IC Card (LTE)
Be sure to read the following warnings
Warning
before use.
Do not put the au Micro IC Card (LTE) in a cooking apparatus
such as a microwave oven or a pressure vessel. Doing so
might cause melting, overheating, fuming, loss of data or a
fault.
Be sure to read the following cautions
Caution
before use.
Material
Surface treatment
−
Nickel and gold
plating
−
−
UV coating
−