Table of Contents
Advertisement
from a faucet or showerhead, at which you might even feel pain in the
skin). Doing so might cause a fault, even though the product has a
waterproof property equivalent to IPX5. Do not wash the product in a
washing machine or ultrasound bath. The product does not float on
water.
Heat resistance
Do not use the product in places where boiling water may splash on it,
in saunas or near hot air (e.g. hairdryer). The product is not resistant
to high temperatures.
Shock
This product is not resistant to shock. Do not drop the product or
subject it to shock. Also, do not jab the microphone, or speaker etc.
with a cotton swab or any sharp object. Failure to do so might cause
damage or a fault.
■ Draining water after wetting the product
As some parts of this product are not watertight, if you use the
product after it gets wet, water remaining in those parts might wet
your clothes or bag, or the sound might become hard to hear. Follow
the steps below to drain water.
Wipe off water
thoroughly on the
product with clean
dry lint-free cloth.
Hold the product
firmly and shake
until water does not
come out.
26
* When shaking the product, check the safety around you.
* Be careful not to have the product pop out, and hold it firmly to
drain water.
* Water left on microphone, speaker, microUSB connection
terminal, charging terminals or headset connection terminal is
not easily wiped off. Shake the product with these parts facing
downward.
Press the product
gently against a
clean dry lint-free
cloth, and wipe off
water coming out
of parts such as
the microphone,
speaker, microUSB
connection
terminal or headset
connection terminal
when facing
downward.
Leave the product for 1 hour or more at
room temperature to dry after removing
water thoroughly.
Even after you take these procedures, water may remain on the
product. Do not place the product near things that you do not want to
wet.
Also, take care not to wet your clothes, bag, etc.
Advertisement
Table of Contents
