Toro Groundsmaster 5900 Installation Instructions Manual page 3

Figure 3
1. Open the fuse-holder cover
2. Remove the 2 ring terminals from the left post of
the fuse holder (Figure
Figure 4
1. Fuse cover
2. Ring terminal—28 + F
V
3. Ring terminal—battery
cable
(Figure 4).
4).
4. Nut
5. Wire connectors (labeled
USE
+ [28 M
COIL V ASTER
C ] and
ONTACTOR
[28 M C
V ASTER ONTACTOR
3. Remove the wire connectors (labeled
M
ASTER
C
ONTACTOR
4. Remove the red insulator and ring terminal
(labeled S
C
ONTACTOR
g285045
1. Nut
2. Ring terminal—S
L O
INE UT
C
ONTACTOR
5. Remove and discard the jumper strap and
insulator
g282709
1. Nuts
2. Jumper strap and insulator 4. Solenoid
-
COIL
6. Remove the bolts and nuts that secure the
])
solenoid to the bracket
7. Remove and discard the solenoid from the
bracket
3
C ] and
ONTACTOR COIL
]) from the solenoid
L O
OLENOID INE UT
]) from the solenoid
Figure 5
3. Red insulator
OLENOID
[28 M
V ASTER
]
(Figure 6).
Figure 6
3. Bolt
(Figure
(Figure 6).
+ [28
COIL V
- [28 M
V ASTER
(Figure 4).
[28 M
V ASTER
(Figure 5).
g282710
g282711
6).