Lubrication; Greasing The Machine; Engine Maintenance; Servicing The Air Cleaner - Toro MB TX 2500 Operator's Manual

Lubrication

Greasing the Machine

Service Interval: Every 50 hours
When operating the machine under normal conditions,
lubricate all grease fittings for the bearings and
bushings with No. 2 lithium grease. Lubricate the
bearings and bushings immediately after every
washing, regardless of the interval listed. Apply a light
coating of oil onto the control cables.
Cylinder pivots (2)—Figure 18
Figure 18

Engine Maintenance

Servicing the Air Cleaner

Service Interval: Every 25 hours—Service or replace
Every 100 hours—Replace the air-cleaner
paper element (more often under extremely
dusty, dirty conditions).
Note:
Operating the engine with loose or damaged
air-cleaner components could allow unfiltered air into
the engine, causing premature wear and failure.
Note:
Service the air cleaner more often under
extremely dusty, dirty conditions.
Removing the Elements
1. Rotate the latches outward.
2. Remove the cover to access the air-cleaner
elements
g019608
1. Air-cleaner cover
3. Remove the foam and paper elements
20).
4. Remove the foam element from the paper
element (Figure
19
the air-cleaner foam element (more
often under extremely dusty, dirty
conditions).
(Figure 19).
Figure 19
2. Air-cleaner latch
20).
g028105
(Figure