Main Features; Precautions - Canon RC-IP100 User Manual

Main Features

The following are the features when this unit is used in
combination with a remote camera.
Simple Operation with LCD Touch Panel
Equipped with full color LCD touch panel, which makes
operation easy through its versatile screen configuration.
Operate Camera Freely with Control Lever
and Customized Buttons
Equipped with a control lever and customized buttons
assignable with functions, which enhances the operability of the
camera.
Also enables smooth pan/tilt operation.
Controls up to 100 remote camera units
This unit can be used to control up to a maximum of 100 remote
camera units.
One of the remote cameras can be connected or controlled via
serial communication (RS-422).

Precautions

Storage and Usage Locations
This unit is exclusively designed for in-door
use.
Avoid using or placing this unit in the following
places.
It might result in malfunctions or failure.
Hot or cold places that are beyond the allowable operating
0
temperature range (0 °C to 40 °C (32 °F to 104°F)).
Locations beyond or below the allowable operating
0
humidity range of 20 %RH to 90 %RH. (Condensation is
not allowed)
Near equipment that emits strong magnetic fields, such as
0
transformers or motors.
Near equipment that emits radio waves, such as
0
transceivers and mobile phones.
Locations with excessive dust and sand.
0
Locations prone to moisture such as window side.
0
Locations that are subjected to radiation, X-rays, salt attack
0
or corrosive gases.
Places subject to smoke or vapor such as near a cooking
0
stove
Places subject to strong vibrations or unstable surfaces
0
Do not leave this unit in a parked car under
direct sunlight or near a heater for long hours.
Protect this unit against penetration of dust
when using it in a place subject to sandy dust.
Main Features
4
Handling Precautions
Do not rub against or press the surface of the
touch panel with a knife or a sharp object.
Do not apply excessive force to this unit; do not
lift this unit while holding the control lever.
Maintenance
Turn off the power before performing any
maintenance.
Wipe using a soft cloth. Wiping with thinner or
benzene may melt or tarnish its surface.
For tough stains, wipe using a cloth that is
dipped into a neutral detergent diluted with
water, followed by wiping with a dry cloth.
Cautions on Installing this Unit on a
Desktop
Install this unit such that it does not fall from the
desktop due to vibrations.
Energy Saving
When this unit is not in use, set the Power
switch to "OFF" to reduce power consumption.
Trademark
Product names and company names indicated
in this manual are trademarks or registered
trademarks of the respective companies.
Disclaimer
Do not use any AC adapter other than the AC
adapter that comes bundled with this product.
The bundled AC adapter and power cord are to
be used with this product only. They cannot be
used with other equipment.
Disposal
When disposing of this product, do so
appropriately by following the applicable laws,
regulations and local laws.