Network Settings; Camera Network Settings; Network Settings On This Controller - Canon RC-IP100 User Manual

Network Settings

Camera Network Settings

.
1 Display the home screen.
If the home screen does not appear, tap the [HOME] button
on the screen.
2 Tap the [SETTINGS] button.
The SETTINGS screen appears.
3 Tap the [Network] button.
4 Tap the [CAMERA REGISTRATION] button.
5 Tap the button corresponding to the camera to be
connected.
IP Camera [AUTO]
o
Tapping the [AUTO] button displays a message.
Tapping the [ENTER] button automatically registers up to 10
cameras that can be operated without user authentication
and displays the "Completed" message. Tap the [Close]
button to complete the configuration.
IP Camera [Manual]
o
Tapping the [Manual] button displays the manual settings
screen for IP address.
0 Tap the left/right buttons to select a registered [CAM
Group] and [CAM No.].
0 Enter the IP address using the numeric keypad.
0 Configure [Port No.], [User] and [Password].
0 Tap the [ENTER] button to confirm the entered values.
0 Configure all the cameras to be registered using the same
procedures.
Memo :
0 This is a function to register the IP address of the camera to
this unit. The IP address of the camera unit cannot be
changed even when performing manual registration by
selecting [Manual].
0 Use the same [Port No.], [User] and [Password] as configured
on the connected camera.
0 Configuring the IP address to "0.0.0.0" deletes the registration
of that camera.
0 Numbers corresponding to a serial camera cannot be
registered.
Network Settings
16
[Serial Activate 1] and [Serial Activate 100] Serial
o
Cameras
0 Serial cameras can be registered to <1-1> or <10-10>.
(<Camera Group No.-Camera No.>)
0 Tap [Serial Activate 1] to register to <1-1> and tap [Serial
Activate 100] to register to <10-10>.
0 "Completed" appears when connection is established.
Upon tapping the [Close] button, configuration is complete
and the button color changes.
Memo :
0 Serial cameras cannot be registered to buttons
corresponding to a number that is registered with an IP
camera.
[Serial Deactivate] Serial Camera Deactivation
o
To deactivate the use of a serial camera, select [Serial
Deactivate].

Network Settings on This Controller

.
1 Display the home screen.
If the home screen does not appear, tap the [HOME] button
on the screen.
2 Tap the [SETTINGS] button.
The SETTINGS screen appears.
3 Tap the [Network] button.
4 Tap the [CONTROLLER] button.
The network settings screen of this unit appears.
5 Enter each item and tap the [ENTER] button.
Memo :
0 The default IP address of this unit is 192.168.100.0.