Huawei B2368 Quick Start Manual page 7

2. Insert a micro-SIM (3FF) card to the ODU.
3. Connect cables and power on the device.
Either a 12 V or 19 V power adapter can be used by the B2368.
Scenario 1: 12 V PSU
CAUTION
Automatic IP address obtaining needs
to be con gured for PCs/user terminals.
12 V DC
PC/user terminal
LAN
PSU indicators
4. Select a location with best signal quality.
• Move the ODU in the installation area. Observe the signal indicator to
select a location with best signal quality (strong LTE signals).
• For other indicator statuses, see the following table.
Color LED Status
O
Steady on
Red
Blinking
Green Blinking
Green
Steady on
Blue Steady on
Yellow Steady on
Yellow
Blinking
Power
Adapter ODU
Indicator
PSU(12 V)
WAN/PWR
Pressed Powered on
Released
Powered o
Status Indication
Powered o
An error occurs, the device is faulty, or there is no SIM card.
Upgrading
Booting up
Strong LTE signals; recommended for installation
Medium LTE signals; suitable for installation
Weak LTE signals; recommended for location reselection
No LTE signals are available, the device is searching for signals, or the device is disconnected.
Reset button:
Press for 3s to 10s to reboot the device.
Press for more than 10s to restore the
device to factory settings.
CAUTION
Tighten screws to prevent
water from entering the ODU.
Scenario 2: 19 V Power Supply Adapter
AC
PC/user terminal
LAN
CAUTION
The WAN/PWR interface can be
connected to only the ODU. This
interface may damage the PCs or
other devices.
@2
0.6 N·m
ODU
Power
supply
Adapter
(19 V)
WAN/PWR