Toro 136-1997 Installation Instructions

Door Mount Mirror Kit
Workman
Unit with Cab
Model No. 136-1997
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
1
Preparing the Machine
No Parts Required
Preparing the Machine
Workman GTX, HDX, and MD
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the engine and remove the key from the key switch.
Preparing the Machine
Outcross 9060
1. Park the machine on a level surface.
2. Shift to the N
EUTRAL
3. Lower any equipped attachments.
4. Engage the parking brake.
5. Shut off the engine and remove the key.
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® GTX, HDX, and MD Utility Vehicles or Outcross Traction
Description
No parts required
Left mirror mount
Right mirror mount
Left handle gasket
Right handle gasket
Side mirror arm assembly
Rearview mirror arm assembly
Flange-head screw (6 x 16 mm)
position.
Register at www.Toro.com.
Form No. 3427-816 Rev A
Installation Instructions
Qty.
–
Prepare the machine.
1
1
1
1 Install the mirror mounts.
2
2
4
Original Instructions (EN) All Rights Reserved *3427-816* A
Printed in the USA
Use