Power Module - Huawei FusionPower6000 Product Description

FusionPower6000
Product Description
SW Button
Table 4-29 SW button description
Function
Description
Wireless
network RF_Z
(802.15.4)
pairing
WLAN enabling
Restoring the
default IP
address, factory
settings, and
user information

4.2.3.1.3 Power Module

Indicators
Table 4-30 Power module indicator description
Indicator
Issue 02 (2021-06-30)
Operation Description
In non-wireless network (802.15.4)
pairing mode, press and hold down
the button for 3s to 5s to enter the
wireless network pairing mode.
In wireless network (802.15.4)
pairing mode, press and hold down
the button for 3s to 5s to exit the
pairing mode; or the system
automatically exits the pairing mode
after 30 minutes without pressing
the button.
Press and hold down the button for
more than 8s to clear network
parameters.
Press the button for less than 3s to
turn on the WLAN service.
Hold down for 1 minute
Color Name
Green Power
indicator
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on The module has input power.
Off The module has no input power
or is faulty.
Blinking at The module is being queried
long (the indicator blinks at 0.5 Hz,
intervals on for 1s and then off for 1s).
4 Product Overview
Indicator Status
The RF_Z indicator is
blinking at super
short intervals.
The RF_Z indicator is
blinking at long
intervals.
The RF_Z indicator is
blinking at super
short intervals.
Unavailable
Unavailable
47