Health And Safety; Safety Precautions; Potential Safety Hazards; Electrical Safety - ABB 4690 Series Operating Instruction

4 6 9 0 S E R I E S | T U R B I D I T Y S E N S O R | O I/AT S 4 1 0 - E N R E V. A
1

Health and safety

Symbols that appear in this document are explained below:
WARNING
The signal word 'WARNING' indicates an imminent danger.
Failure to observe this information may result in death or
severe injury.
CAUTION
The signal word 'CAUTION' indicates an imminent danger.
Failure to observe this information may result in minor or
moderate injury.
NOTICE
The signal word 'NOTICE' indicates potential material
damage.
Note
'Note' indicates useful or important information about the
product.

Safety precautions

Be sure to read, understand and follow the instructions
contained within this manual before and during use of the
equipment. Failure to do so could result in bodily harm or
damage to the equipment.

Potential safety hazards

4690 turbidity sensor – electrical damage to the equipment.
WARNING
Bodily injury.
To ensure safe use when operating this equipment, the
following points must be observed:
• Normal safety precautions must be taken to avoid the
possibility of an accident occurring when operating in
conditions of high pressure and/or temperature.
Safety advice concerning the use of the equipment
described in this manual or any relevant Material Safety
Data Sheets (where applicable) can be obtained from the
Company, together with servicing and spares information.

Electrical safety

This equipment complies with the requirements of CEI/IEC
61010-1 Edition 3.1 2017-01 'Safety Requirements for Electrical
Equipment for Measurement, Control and Laboratory Use' and
complies with US NEC 500, NIST and OSHA.
If the equipment is used in a manner that is not specified by the
Company, the protection provided by the equipment may be
impaired.
3