Advertisement
Tool Rental Center
PURPOSE
SAFETY
Perform the necessary maintenance procedures as specified in the following tables (for complete procedures, refer to the Operator's Manual):
Tool Inspection Process
Action
Clean the air filter cyclone housing, air channels, and air intake screen.
Check the condition of the teeth; rotate or replace any that are worn or damaged;
torque the nuts for all teeth.
Check condition of the chip control flaps.
Check the drive belt tension
Revision 1 02-24-2021
Spring Maintenance
Model No.
Follow the directions below to maintain this tool.
Refer to the product Operator's Manual for complete safety information.
Guide
SGR-6 Stump Grinder
22600HD—316000001 and Up
Part Number
137-7683
Supplier Technical Support #:
800-888-9926 (US and Canada)
Supplier Website:
www.Toro.com
Recommended Parts
Description
V-belt
Toro Form No 3445-719 Rev A
Advertisement
