Joystick Steering Lever
This lever controls turning operations.
Pressing lever (8) down to the left turns the machine to the
left.
Pressing lever (8) down to the right turns the machine to the
right.
How far lever (8) is depressed, controls how fast the
machine turns.
When operating the steering wheel at the same time,
priority is given to the operation that is displaced further
from the neutral position.
Under normal operating speeds, the steering wheel will be
displaced further from the neutral position, so the steering
wheel operation will have priority.
Forward/Reverse Switch (Left)
This switch (5) is for changing the direction of travel,
between forward, neutral and reverse.
F position : Forward travel
N position : Neutral
R position : Reverse travel
When the Forward/Reverse lever is operated, it is given
priority.
DSS (Down Shift Switch)
When DSS (4) is pressed, it downshifts the transmission.
During normal operations, the 2nd speed setting is used,
but when traveling forward and digging, if DSS (4) is
pressed, it automatically shifts down to 1st, increasing the
driving force and improving digging performance. If the
position of Forward/Reverse switch (5) is switched to reverse
(R), it automatically shifts to 2nd, returning to the original
speed range. For details, refer to the section "DSS (Down
Shift Switch)" in Chapter 1 "Operator's Station".
Wiper Switch
If you press the wiper switch (6), it actuates the front wiper
one time.
OTHER ATTACHMENTS
Joystick Steering
13-2
4
5
8
6
MNEK-13-002