Table of Contents
Advertisement
Driving in Water or on Soft Ground
IMPORTANT: If the axles, transmission, etc. should
become submerged, they must be reconditioned
immediately, otherwise the inner gears may wear
excessively, or the machine may become damaged.
Contact your nearest Hitachi dealer for inspection and
maintenance.
Do not submerge the front and rear axles, transmission,
or front and rear propeller shafts in water or mud. Avoid
driving in water as much as possible.
If driving in water or mud is unavoidable, do not allow
the machine to be submerged deeper than allowable
depth (A) (up to the bottom of the axle housing). Reduce
the allowable depth if there is concern the river bed is
rugged, or water is flowing fast.
When driving/operating on muddy ground, mud can
easily accumulate on the frame even if the frame is not
heavily submerged in mud. Check regularly and clean as
necessary.
f
NOTE: After operation is complete, be sure to wash and
lubricate all areas which were submerged.
DRIVING MACHINE
4-13
M4GB-04-003
Advertisement
Table of Contents
