Table of Contents
Advertisement
Clutch Cut Position Switch
Clutch cut position switch (2) changes the function of left and
right brake pedals.
Operating clutch cut position switch (2) turns the clutch cut off
function ON and OFF.
Clutch cut ON
By depressing left or right brake pedal, the clutch is
disengaged and brake is applied without transmitting the
drive power to the tires.
: Clutch cut ON while lightly depressing the brake
pedal: (Suitable for loading work on a level
surface.)
: Clutch cut ON while deeply depressing the brake
pedal: (Suitable for work on a slope.)
Clutch cut OFF
When depressing left or right brake pedal, brake is
applied while driving power is transmitting to the tires.
f
NOTE:
When starting to ascend a slope, turn clutch cut position
switch (2) OFF (neutral), depress the left brake pedal.
Gradually release the left brake pedal while depressing the
accelerator pedal to easily start ascending the slope.
Effective use of the clutch cut position switch leads to
reduced fuel consumption and overheating of axle oil.
Power Mode Switch
Push power mode switch (3) to ON/OFF the power mode.
OFF : This mode is suitable for loading work with a high
value placed on fuel consumption.
Under auto shifting mode, the gear is shifted at an
early timing.
ON : This mode is suitable for heavy digging work with a
high value placed on work effectiveness.
Under auto shifting mode, the gear is shifted at a
regular timing.
Each time the upper side of the switch ( mark) is pressed,
the power mode changes ON/OFF alternately.
Power mode icon
(4) is displayed on the power mode
indicator of the monitor screen.
f
NOTE: When turning the key switch ON, the power mode
always starts from OFF state. Before operating the machine at
power mode, operate the power mode switch and ensure the
power mode icon
(4) is displayed on the monitor screen.
OPERATOR'S STATION
1-103
2
3
MNEC-01-526
2
Clutch cut ON
OFF (Neutral)
Clutch cut ON
MNEC-01-025
3
MNEC-01-016
MNEK-01-103EN
4
Advertisement
Table of Contents
