Forward/Reverse Switch - Hitachi ZW 310-6 Operator's Manual

Forward/Reverse Switch

It is possible to choose between Forward/Reverse switch (left)
(5) and Forward/Reverse switch (right) (19). When Forward/
Reverse selector switch indicator (21) is displayed on the
monitor, Forward/Reverse switch (left) (5) is selected. When
Forward/Reverse selector switch indicator (22) is displayed on
the monitor, Forward/Reverse switch (right) (19) is selected.
Forward/Reverse Switch (Left) (5)
1. Put both Forward/Reverse switch (left)(5) and Forward/
Reverse switch (right)(19) and Forward/Reverse travel
lever (17) in neutral (N) position.
2. Press joystick steering selector switch (7) in the ON
position for one second.
3. Check and make sure the Forward/Reverse selector
switch indicator (21) is displayed on the monitor.
Forward/Reverse Switch (Right) (19)
1. Put both Forward/Reverse switch (left)(5) and Forward/
Reverse switch (right)(19) and Forward/Reverse lever (17)
in neutral (N) position.
2. Long press Forward/Reverse selector switch (20) in the
ON position for one second.
3. Check and make sure Forward/Reverse selector switch
indicator (22) is displayed on the monitor.
f
NOTE: If the Forward/Reverse travel lever is put in any
position other than neutral (N) position when joystick steering
lever (8) is enabled, Forward/Reverse switch (left)(5) and
(right)(19) become disabled.
To re-enable Forward/Reverse switch (left)(5) or (right)(19),
put Forward/Reverse travel lever (17) and Forward/Reverse
switch (left)(5) and (right)(19) in the neutral (N) position and
turn joystick steering selector switch (7) OFF for a moment
and then press it in the ON position for one second.
OTHER ATTACHMENTS
Joystick Steering
21
13-4
8
19
Fingertip Control Type
19
Multi-Function Joystick Type
MNEK-13-012
5
7
MNEK-13-002
20
MNEC-01-526
20
MNEC-01-043
MNEK-01-100
22
MNEK-13-007