Hitachi ZW 310-6 Operator's Manual page 233

Emergency Stop and Restart of Operation
Follow the tips described below when required to stop or
restart operation when an emergency has occurred.
1. Slowly release the accelerator pedal. Depress the
service brake pedal to stop the machine.
2. Slowly depress the accelerator pedal while releasing
service brake pedal to move the machine again.
3. In case the machine is required to park the machine
for a long period of time, return the forward/reverse
lever to neutral (N), turn the parking brake switch ON,
and apply the parking brake to ensure safety.
4. During long load and carry applications, the lift
arm position may lower due to inner hydraulic oil
leaks. When required to adjust the lift arm position,
temporarily stop machine, return the forward/
reverse selector switch lever to neutral, apply the
parking brake by turning the parking brake switch
ON. Then, after repositioning the position of lift arm
and bucket, begin moving the machine again. Always
allow the machine to maintain correct drive position.
MOVING THE MACHINE
4-11