Power Mode Selector Switch - Hitachi ZW 310-6 Operator's Manual

Power Mode Selector Switch

Two operation modes are available and can be selected
by power mode selector switch (3) depending on the
applications.
Each time the switch is pressed, the power mode is
activated (ON) and deactivated (OFF) alternately.
Power : The power mode is suitable for heavy digging
mode work prioritizing work effectiveness.
(ON) Under auto shifting mode, the gear is shifted
in regular engine RPM's (min
mapping.
Power : When the power mode is turned OFF, the
mode machine operates putting more emphasis on
(OFF) lowering fuel consumption.
Under auto shifting mode, the gear is shifted
with lower engine RPM's (min
mapping.
When the power mode is activated, the symbol (
is displayed on the power mode indicator of the monitor
screen.
OPERATOR'S STATION
) and shift
-1
) and shift
-1
) (4)
1-104
3
MNEC-01-016
3
MNEC-01-041
MNEK-01-103EN
4