Table of Contents
Advertisement
Coolant Temperature Gauge
The engine coolant temperature is indicated with a needle.
When the needle stays in the range (1) during operation, the
coolant temperature is normal.
If the engine coolant temperature becomes abnormally
high, the service indicator will flash and the alarm buzzer will
sound.
Stop machine operation and run the engine at low idle
to lower the coolant temperature. After the coolant
temperature lowers, stop the engine for inspection. Visually
inspect coolant level in reservoir. In case the needle does
not move at all, error in the electrical system is suspected.
Contact your nearest authorized dealer for machine
inspection.
Fuel Gauge
The fuel level is indicated by the needle. Refuel before
the needle reaches in the red range "E". When the needle
reaches in the red range (E), the fuel level indicator lights.
f
NOTE: The fuel level indicator may light even if the
indicator needle does not reach the red range (E),
depending on the tilt angle of machine.
OPERATOR'S STATION
1-16
1
M4GB-01-028
Fuel Level Indicator
MNEC-01-002
Advertisement
Table of Contents
Troubleshooting
