Handling Jobs - ABB RPC S-series Applications Manual

3.1.2 Handling jobs

Creating a new job
1
2
3HAC050970-001 Revision: -
3 Integrated Power Source application details
Note
A new job number should be numeric from 0 to 89.
If the new job number is the same as one of the used job numbers, the job will
be replaced with default parameters.
Action
In the Job Manager view, tap
the Operate menu and select
New.
Enter the new job number and
tap OK.
© Copyright 2014 ABB. All rights reserved.
Info/illustration
en1000001322
en1000001324
3.1.2 Handling jobs
Continues on next page
17