Integrated Power Source Application; Overview - ABB RPC S-series Applications Manual

2 Integrated Power Source application

2.1 Overview

Supported power sources
Integrated Power Source is an administrative interface for power sources in the
FlexPendant. The following power sources are compatible with the Integrated
Power Source:
Firmware requirements
Integrated Power Source can only work with the power source of required firmware:
3HAC050970-001 Revision: -
• RPC Synergic 300
• RPC Synergic 400
• RPC Synergic 500
• Panel version : 5A8 or later
• Robot Interface version : 9A7 or later
© Copyright 2014 ABB. All rights reserved.
2 Integrated Power Source application
2.1 Overview
11