GE LOGIC C2 Series Technical Publication page 86

Care and Maintenance
Peripheral/option checks
Table 4-3:
Step Item
1. Media
2. B/W Printer
3. Color Printer
4. DICOM
5. ECG
6. Footswitch
Mains cable inspection
Table 4-4:
Step Item
1. Unplug Cord
2. Inspect
3. Verify
4. Verify
4-8
If any peripherals or options are not part of the Ultrasound
system configuration, the check can be omitted.
GE approved peripheral/hardware option functional checks
Verify media drive(s) read/write properly. Clean if necessary.
Verify hardcopy output of the B/W video page printer. Clean heads and
covers if necessary.
Verify hardcopy output of the Color video page printer. Clean heads and
covers if necessary.
Verify that DICOM is functioning properly. Send an image to a DICOM
device.
Verify basic operation with customer
Verify that the footswitch is functioning as programed. Clean as necessary.
Mains Cable Inspection, As Appropriate
Disconnect the mains cable from the wall and Ultrasound system.
Inspect it and its connectors for damage of any kinds.
Verify that the LINE, NEUTRAL and GROUND wires are properly attached
to the terminals, and that no strands may cause a short circuit.
Inlet connector retainer is functional.
Ultrasound System
Description
Description
–
Common Service Information
Direction 5444964-100 English Rev. 5