Table of Contents
Advertisement
Additional Tests
PERFORMING SERVICE RESETS
An "instructional" dialog displays,
showing the manual procedures for
resetting the indicator light. When
finished viewing the instructions,
press the M button to return to the
Main Menu.
5. To perform oil reset by command,
choose Perform Command.
A "status" message displays while
oil reset is in progress.
6. When the reset process has competed,
a
confirmation
Choose Back to return to the Main
Menu.
If the oil reset was not successful,
an advisory message displays.
To
perform
procedure, choose View Procedure.
An "instructional" message displays,
showing the manual procedures for
resetting the indicator light.
If you do not wish to perform the oil
reset by procedure, choose Exit to
return to the Main Menu.
Battery Reset
You can use the Scan Tool to view the procedures for resetting the battery
monitor system following battery replacement or perform battery reset OBD
service (for Audi, BMW, Ford, Volkswagen and Volvo models only).
To view battery reset procedures:
1. While linked to a vehicle, press M.
The Main Menu displays.
2. Select Battery Reset, then press ENTER
The Battery Reset menu displays.
3. Select Battery Reset Procedures, then
press ENTER
The
menu displays. The menu provides
access to General Information,
and procedures to be followed
Before
Before Battery Connection, and
After Battery Connection.
80
message
the
oil
.
Battery
Reset
Battery
Disconnection,
displays.
reset
by
.
Procedures
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CarScan RepairSolutions 2 and is the answer not in the manual?
Questions and answers
Have option for live data but doesn’t work
The live data option may not work on the Innova CarScan RepairSolutions 2 for the following reasons:
1. Vehicle Incompatibility: The vehicle may not support live data (PID) functionality, as some vehicles do not provide this capability.
2. Communication Error: The Scan Tool may fail to establish communication with the vehicle. To resolve this:
- Ensure the vehicle is OBD2 compliant.
- Verify the connection at the DLC (Data Link Connector) and ensure the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then turn it back ON to reset the computer.
3. Advisory Message: If live data is not supported by the vehicle, an advisory message will display stating that live data is unavailable.
4. Hardware or Setup Issue: There could be issues with the Scan Tool's connection or setup, such as an improper pairing process or hardware malfunction.
This answer is automatically generated
Jamesssssssss
How do I perform ABS bleed process on 2003 Ford F150 with the tool? It just refers to instructions in the manual but I can’t find it.
The ABS Bleeding function in the Innova CarScan RepairSolutions 2 is only available for Chrysler, GM, Hyundai/Kia, Mazda, and Toyota vehicles. Since a 2003 Ford F-150 is not listed among the supported makes, the ABS Bleeding process cannot be performed using this tool.
This answer is automatically generated