Overview Of Installation And Removal - NEC Express5800 Series User Manual

Chapter 2 Preparations
1.3

Overview of Installation and Removal

To install or remove an optional device, Hard Disk Drive, or Solid State Drive installed in the CPU blade, you
may need to remove the CPU blade from the Blade Enclosure if the CPU blade is installed in Blade Enclosure.
Refer to Chapter 3, (2. Installation and Connection) for details.
Important
Be sure to observe the following precautions to use the server safely. Failure to observe the
precautions may cause burns, injury, and property damage. For details, refer to Safety
precautions in Precautions for Use.
1. After the shutdown processing for the CPU blade to be removed, turn off the power of the CPU blade.
Refer to Chapter 3 (7. Power-off of Blade Server).
2. Take the CPU blade out from the Blade Enclosure.
Refer to the User's Guide of the Blade Enclosure.
3. Put the CPU blade on an anti-static sheet with little dust.
4. Remove the top cover. In addition, remove the air duct if needed.
Refer to Chapter 2 (1.4 Installation and Removal Procedure (Common section)).
5. Perform installation or removal procedure for the component required for your system.
Refer to sections in Chapter 2 (1.5 Processor (CPU) through (1.12 LAN Riser).
6. Install the top cover. In addition, install the air duct if needed.
Refer to Chapter 2 (1.4 Installation and Removal Procedure (Common section)).
7. Install the CPU blade in Blade Enclosure.
Refer to the User's Guide of Blade Enclosure.
This completes installation or removal of internal optional devices.
Continue the setup with reference to Chapter 2 (2.2 Connecting Peripheral Devices).
38
Remove the target CPU blade only. Do not remove any other blank cover or CPU
blade from another slot. Be sure to install or remove the CPU blade one by one.
Pay attention to hot surface.
Make sure to complete installation.
Do not install with the top cover, air duct, and/or front frame removed.
Do not get your fingers caught when installing components
Express5800/B120d, B110d User's Guide
1. Installing Internal Optional Devices
CAUTION