NEC Express5800 Series User Manual page 101

Chapter 3 Setup
(b) I/O Blade submenu
If you select I/O Blade on PCI Configuration submenu, the screen as shown below appears.
For details about the options, see the table below.
Option
PCI Slot Option ROM Scan
LAN5 Option ROM Scan
LAN6 Option ROM Scan
Mezzanine
Slot 3 Option ROM Scan
Slot 4 Port1 Option ROM
Scan
Slot 4 Port2 Option ROM
Scan
Parameter
Disabled
Enable or disable the option ROM SCAN for SCSI
[Enabled]
controller on additional HDD blade.
[Disabled]
Enable or disable the option ROM SCAN for LAN5 on
Enabled
board.
[Disabled]
Enable or disable the option ROM SCAN for LAN6 on
Enabled
board.
[Disabled]
Enable or disable the option ROM SCAN on the
Enabled
mezzanine slot.
Express5800/B120d, B110d User's Guide
2. Details of System BIOS
Descriptions
[ ]: Factory settings
101