GE IC3645SR3R404P2 Installation And Operation Manual page 32

DIAGNOSTIC STATUS CODES
SX TRANSISTOR CONTROL
TRACTION
DESCRIPTION OF STATUS
STATUS CODE
Indicates that the user needs to cycle
-37
the key switch after exiting the handset
routine, if the key switch is still on.
MEMORY RECALL
NO
SYMPTOM
Controller will not operate.
Circuits valid
POSSIBLE CAUSE
for
Key switch is on and the user has just exited the
Traction
handset routine.
•=
Controller
TRACTION DESCRIPTION OF STATUS
STATUS CODE
A -41 status code exists in the opposite
-40
control.
MEMORY RECALL
NO
SYMPTOM
The controls only permit reduced truck
Circuits valid
performance.
for
POSSIBLE CAUSE
Traction
A -41 fault code is being displayed in the
Controller opposite control.
•=
•=
CORRECTIVE ACTIONS
Cycle the key switch.
CORRECTIVE ACTIONS
Allow the controls to cool to ambient
temperature so that the status code is
resolved.
If status code fails to disappear when both
controls return to ambient temperature, a
defective controller unit is possible.
CAUSE OF STATUS INDICATION
This status code will be displayed when the user exits
the handset routine and the key switch is still on.
TROUBLE-SHOOTING DIAGRAM
NO GRAPHIC FOR THIS
STATUS CODE
CAUSE OF STATUS INDICATION
This status code will be displayed in the master
control when the slave control is in thermal cutback,
and displayed in the slave control when the master
control is in thermal cutback.
TROUBLE-SHOOTING DIAGRAM
NO GRAPHIC FOR THIS
STATUS CODE
Page 32
July 1999