Siemens Sinamics S120 Manual page 240

Motor Modules
6.6 Technical specifications
Note
Derating factors for pulse frequencies in the range between fixed values
For pulse frequencies in the range between the specified fixed values, the relevant derating
factors can be determined by linear interpolation.
Maximum output frequencies achieved by increasing the pulse frequency
By multiplying the rated pulse frequency with a multiple integer, the following output
frequencies can be achieved taking into account the derating factors:
Table 6- 19
Table 6- 20
Depending on the system configuration, higher frequencies are possible.
1)
240
Maximum output frequencies achieved by increasing the pulse frequency in VECTOR mode
Pulse frequency [kHz]
1.25
2
2.5
4
5
Maximum output frequencies achieved by increasing the pulse frequency in SERVO mode
Pulse frequency [kHz]
2
4
Maximum output frequency [Hz]
100
160
200
320
400
Maximum output frequency [Hz]
300
300 / 550
1)
Liquid-cooled chassis power units
Manual, (GH7), 11/2016, 6SL3097-4AM00-0BP7