Product Overview; Controls - Toro 23508 Operator's Manual

Product Overview

1. Seeder-control lever
2. Self-propel drive bail
3. Handle
4. Blade-control bail
5. Fuel-tank cap
Figure 4
6. Seed hopper and cover
7. Seeding-rate gauge
8. Depth-control lever
9. Recoil-start handle
1. Recoil-start handle
g252290
2. Fuel-shutoff valve
3. Choke lever
4. Air-cleaner
5. Fuel-tank cap

Controls

Choke Lever
Before starting a cold engine, move the choke lever
(Figure 5) to the left. After the engine starts, regulate
the choke to keep the engine running smoothly. As
soon as possible, move the choke lever all the way
to the right.
Note:
A warm engine requires little or no choking.
Throttle Lever
The throttle lever
and controls the engine speed. Moving the throttle
lever rearward increases the engine speed, and
moving the throttle lever forward decreases the
engine speed.
Engine On/Off Switch
The engine on/off switch
the front right-hand side of the engine. Rotate the
switch clockwise to the O
the engine. Rotate the switch counterclockwise to the
O position to shut off the engine.
FF
9
Figure 5
6. Throttle lever
7. Dipstick
8. Oil-drain plug
9. On/Off switch
(Figure 5) is located on the engine
(Figure 5) is located on
position before starting
N
g252291