Setup; Unfolding The Handle; Checking The Engine-Oil Level; Installing The Ce Conversion Kit - Toro 23508 Operator's Manual

Setup

1

Unfolding the Handle

No Parts Required
Procedure
1. Raise the handle to the operating position
(Figure 3).
2. Slide the oval locking rings down each side of
the upper handle and over the lower handle
(Figure 3), locking the handle sections together.
Figure 3
2
Checking the Engine-Oil
Level
No Parts Required
Procedure
Refer to Checking the Engine-Oil Level (page
3
Installing the CE
Conversion Kit
Parts needed for this procedure:
1 CE conversion kit (optional kit—sold separately)
Procedure
For machines requiring CE compliance, install the
optional CE conversion kit; refer to the CE conversion
kit installation instructions.
g029059
8
22).