Huawei NetCol8000-C070 Quick Manual page 20

2. Wizard startup flowchart
Precautions
Select commissioning items
Indoor fan commissioning
Success
(Optional) Electric heater commissioning
Success
Chilled water valve commissioning
Success
(Optional) Humidifier commissioning
Success
8
Checking after Commissioning
Check Item
The controller has exited from the diagnostic mode.
The temperature and humidity are correctly set.
9
Power-Off
1. Tap Shutdown on the LCD home screen.
2. Turn off all switches on the smart cooling product.
3. If the smart cooling product will not be used over a long time, drain the water in the heat
exchanger or take antifreeze measures to avoid frost cracks.
Appendix 1: Precautions Against Adding Glycol
For details about adding glycol, refer to the
Smart Cooling Product User Manual
To prevent glycol solution from corroding pipes and the heat exchanging coil, corrosion inhibitor
should be mixed into the glycol solution. For details about the mixing schemes, consult glycol
experts.
Start
Yes
Yes
End
.
No
Commissioning
No
interrupted
(Handle the
fault by
Fail
referring to
the tips
Fail
displayed on
the home
screen.
Fail
Perform
wizard startup
after the
Fail
handling.)
NetCol8000-C(070, 130, 190) In-room Chilled Water
19
Result
□ Passed □ Failed
□ Passed □ Failed