User Manual Usage - Huawei PDU8000 User Manual

PDU8000 Modular Precision PDC V2.0
User Manual
This chapter describes the notes for using the precision modular PDC user manual.
●
●
●
●
●
●
●
●
●
Issue 04 (2021-04-13)
Before using this document, get familiar with the actual configuration and
application scenario of the modular precision PDC.
Before using this document, make available the documents delivered with
each component.
User interfaces displayed in this document correspond to the monitor display
module (MDU) version V100R002C46SPC914 and are for reference only.
Put on necessary protective equipment such as the safety helmet and gloves
before entering the site.
Before performing an operation, ensure that the prerequisites are met.
Otherwise, the expected result may not be achieved. More seriously,
equipment damage and personal injury may occur.
Before using this document, read through and keep in mind the safety
precautions and the cautions and notes for operations.
Configuration parameters are essential to the reliable running of a system.
Improper modifications of parameters easily cause abnormal running status,
or even damage to the system.
You are not allowed to modify configuration parameters without permission
when using the modular precision PDC. If a modification is necessary, contact
Huawei technical support. Huawei shall not be responsible for any loss caused
by unauthorized configuration modification.
Operations marked as optional in the chapters, sections, or procedures can be
performed depending on the actual configuration and requirements of the
modular precision PDC.
Copyright © Huawei Technologies Co., Ltd.
1

User Manual Usage

1 User Manual Usage
1