Huawei PDU8000 User Manual page 129

PDU8000 Modular Precision PDC V2.0
User Manual
●
●
Procedure
Step 1 Remove the protective panel of the SPD.
Take appropriate insulation measures to avoid electric shocks when removing the
panel.
Step 2 Switch off the SPD circuit breaker.
Step 3 Detect the L1, L2, L3, and N voltages to the PE using an electrical tester pen, and
verify that the faulty SPD has no voltage before replacing the faulty SPD.
8-2
Figure 8-2 Detecting the voltages
Step 4 Use a flat-head screwdriver to lever the faulty SPD out.
Step 5 Install a new SPD module.
Figure 8-3 Replacing an SPD Module
Issue 04 (2021-04-13)
Tools: electrical tester pen, key to the PDC cabinet door, Phillips screwdriver,
flat-head screwdriver
Materials: new SPD module
NO TICE
shows how to detect the voltages.
Copyright © Huawei Technologies Co., Ltd.
8 Maintenance Guide
Figure
122