Temperature - GE Multilin 489 Instruction Manual

CHAPTER 6: ACTUAL VALUES
6.3.4

Temperature

TEMPERATURE
Note
489 GENERATOR MANAGEMENT RELAY – INSTRUCTION MANUAL
Courtesy of NationalSwitchgear.com
PATH: ACTUAL VALUES A2 METERING DATA
HOTTEST STATOR RTD
[ ] RTD#1: 40°C
RTD #1
MESSAGE
TEMPERATURE: 40°C
RTD #2
MESSAGE
TEMPERATURE: 40°C
RTD #3
MESSAGE
TEMPERATURE: 40°C
RTD #4
MESSAGE
TEMPERATURE: 40°C
RTD #5
MESSAGE
TEMPERATURE: 40°C
RTD #6
MESSAGE
TEMPERATURE: 40°C
RTD #7
MESSAGE
TEMPERATURE: 40°C
RTD #8
MESSAGE
TEMPERATURE: 40°C
RTD #9
MESSAGE
TEMPERATURE: 40°C
RTD #10
MESSAGE
TEMPERATURE: 40°C
RTD #11
MESSAGE
TEMPERATURE: 40°C
RTD #12
MESSAGE
TEMPERATURE: 40°C
These messages are seen only if the corresponding RTDs are programmed. The actual
messages reflect the RTD Names as programmed.
The current level of the 12 RTDs will be displayed here. If the RTD is not connected, the
value will be "No RTD". If the RTD is shorted, then "---" will be displayed. If no RTDs are
programmed in the
S7 RTD TEMPERATURE
flash message will appear when an attempt is made to enter this group of
PROGRAMMED
messages.
TEMPERATURE
Range: –50 to 250°C, No RTD Seen only
if at least 1 RTD programmed
as Stator
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
Range: –50 to 250°C, No RTD (open)
--- (shorted)
setpoints menu, the
THIS FEATURE NOT
6–19