2.Copier-specific Adjustments
2.11
To Make Photo Edges Look Softer
Before adjustment
The edges (contours) of the image are
highly visible.
Explanation
When a photo image is copied, the contours or edges of the image sometimes become highly visible on
the copy. Perform adjustment regarding image processing (sharpness intensity), in order to soften the
edges of the image.
Procedures
• You can start with any of the procedures. But it is recommended to perform the procedures in order, as
listed below. You can perform one procedure in conjunction with another. But if this changes the image
quality more than required or loses the effectiveness of the adjustment, restore the settings made in
the previously performed procedure to the original ones. Then perform other procedures.
• Both the service technician and the user can perform procedures (1) and (2).
• Only the service technician must perform procedures (3) to (5).
© 2018 TOSHIBA TEC CORPORATION All rights reserved
After adjustment
The edges look soft.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-50