To Make Photo Edges Look Softer - Toshiba e-Studio6506AC Imaging Manual

2. Copier-specific Adjustments

2.10 To Make Photo Edges Look Softer

Before adjustment
The edges (contours) of the image are highly
visible.
 Explanation
When a photo image is copied, the contours or edges of the image sometimes become highly visible on the copy.
Perform adjustment regarding image processing (sharpness intensity), in order to soften the edges of the image.
 Procedures
* You can start with any of the procedures. But it is recommended to perform the procedures in order, as listed
below. You can use one procedure in conjunction with another. But if this changes the image quality more than
required or loses the effectiveness of the adjustment, restore the settings made in the previously used procedure
to the original ones. Then use other procedures.
* Both the service technician and the user can use procedures (1) and (2).
* Only the service technician must use procedures (3) to (5).
e-STUDIO5506AC/6506AC/7506AC (Ver01)
After adjustment
The edges look soft.
© 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
2-46