Page 3
This is a manual that is aimed at general users and administrators. Model and series names in this manual In this manual, each model name is replaced with a series name as shown below. Model name Series name e-STUDIO2010AC/2510AC e-STUDIO5015AC Series e-STUDIO2515AC/3015AC/3515AC/4515AC/5015AC e-STUDIO2018A/2518A/3018A/3518A/4518A/5018A e-STUDIO5018A Series...
Page 4
About the defaults shown in this manual The defaults shown in this manual are the values in the standard operating environment. The values may have been changed from these defaults. The defaults for your model may differ from the defaults shown. ...
About Home Screen Remote Assistant Menu [Remote Assistant Menu] is displayed on the home screen*. This may not be displayed depending on the mode in use. This menu has the following three functions. Logs Transmission This is used to transmit or delete logs of the equipment in order to clear problems. ...
[Administration] Tab Network settings Setting up SMB In SMB, you can specify the SMB network properties to access this equipment through a Microsoft Windows Network and enable SMB printing. When you enable the SMB, users can also browse the local folder in the equipment. You can also specify the WINS server when the WINS server is used to enable the Windows print sharing and Windows file sharing services between the different subnets.
Page 11
2.TopAccess Item name Description NetBIOS Name Enter the NetBIOS name of this equipment. The equipment uses “MFP<NIC Serial Number>” as the default NetBIOS name. You can enter only alphanumerical characters and “-” (a hyphen) for NetBIOS names. If you use any other characters, a warning message will be displayed.
Page 12
2.TopAccess Item name Description 12 Secondary WINS Server Specify the IP address of the secondary WINS server as you require when the WINS server is used to provide NetBIOS name in your local area network. If the Primary WINS Server is unavailable, the Secondary WINS Server will be used.
Page 13
2.TopAccess Item name Description 17 SMB Client Authentication Specify the authentication method for the SMB clients. Kerberos/NTLMv2 — Specify this when connecting to an SMB server using Kerberos/NLTMv2 authentication. NTLMv2 authentication is used if Kerberos authentication has failed. Kerberos/NTLMv1 — Specify this when connecting to an SMB server using Kerberos/NTLMv1 authentication.
Page 14
2.TopAccess Item name Description 19 SMB Signing of SMB Client Select whether SMB Signing is enabled or disabled when this equipment accesses the clients using SMB, such as when this equipment stores the scanned data in the network folder using SMB. ...
Page 15
2.TopAccess VNC Setting You can use a computer or a mobile terminal such as a tablet and a smartphone to check and operate the control panel. The default password for this VNC function is “d9kvgn”. Be sure to change it before using this function. Specify a password with six or more and eight or less alphanumeric letters.
2.TopAccess Fax settings Received Forward Setting for Application You can set whether or not to save received data (meta data) which can be used for the activation of the received document (image file received by fax) and an application in its storage area. For details about the application, contact your service technician or representative.
2.TopAccess Item name Description Destination Set the box to save the received document in the storage area of an application. Box Number Select the box number to save the received document. “000: Public Box” is set as the default. Password Enter the password if it is set for the specified box.
Page 18
2.TopAccess Item name Description Import Import the certificate for encrypted communications using wireless LAN, IEEE 802.1X authentication, IPsec, or SSL/TLS. [Browse] button — Allows you to select the certificate file. [Upload] button — Uploads the selected certificate file. [Delete] button — Deletes the registered certificate file. SCEP(Automatic) Automatically acquires the certificate for encrypted communications using IP sec or SSL/TLS.
2.TopAccess Item name Description Country/Region Name Enter the country or region name using two alphanumerical characters and symbols. (Example: JP) State or Province Name Enter the state or province name with alphanumerical characters and symbols. You can enter up to 128 characters. Locality Name Enter the city or town name with alphanumerical characters and symbols.
2.TopAccess Application List Displays the application list that is already installed. You can manage operations for each application such as opening/closing, setting the startup method, and uninstalling/installing. Item name Description Application Icon Displays the application icon. Application Name Displays the application name. Click the application name to display the application settings page.
Page 21
2.TopAccess Item name Description Details Displays the Application Details screen. By clicking this button, Name, Version, Framework Version, Application ID, Product ID, Authentication, License, Status, Summary, Vendor Name, URL, License Agreement, ReadMe, and Language of an application are displayed. You can set the department or user authentication at the startup of each application.
Setting up AirPrint in TopAccess When Security Certificate Expired and AirPrint Becomes Unusable When expiration of the qualification information of the encryption is displayed on the macOS screen being operated and macOS AirPrint Print, macOS AirPrint Fax and macOS AirPrint Scan which use the security communication (*1 or *2) for AirPrint have become unusable, reperform the creation in [self-signed certificate] of [Device Certificate] on TopAccess.
Precautions for AirPrint When using AirPrint Fax You can use numbers 0 to 9 and symbols “*”, “#”, “-” and “p”. “-” and “p” function as pause and “#” functions as tone switching, too. In the transmission history of this equipment, “p” is indicated by “-”. Precautions for AirPrint 25...
Page 26
3.AirPrint FUNCTION 26 Precautions for AirPrint...
List Print Function List (Administrator) Function Description User Received Forward Setting for Application - Enable Shows whether Fax Received Forward is enabled Received Forward? or disabled. Received Forward Setting for Application - Backup Shows whether backing up of a received fax is Setting? enabled or disabled.