Table of Contents
Advertisement
2.COPY FUNCTIONS
Erasing the shadow on edges
You can erase the shadow on the edges of copies. When you copy thick books, you can erase the surrounding shadow
with this function. The area to erase can be changed from 4 mm to 15 mm (0.2" to 0.6") in increments of 1 mm (0.04").
This function is available only for paper of standard sizes.
If the original is different from paper in size (the ratios of width and height are different), the shadow might not be
erased on some edges.
Menu Functions
EDGE ERASE
Press [COPY].
1
Press
or
to select the item displayed on the LCD screen, and then press .
2
Press
or
to select the setting item.
3
Set the setting as follows.
4
For "OFF":
Press [OK].
For "ON":
1. Press .
2. Press
or
to increase or decrease the value for the area to erase.
3. Press [OK].
If you just press [OK] for "ON", the default value (7 mm (0.3")) of this function is used.
54 Copy Settings
READY
1
100%
ID CARD:OFF
EDGE ERASE:OFF
Settings
OFF
ON
A4
Advertisement
Table of Contents
