Caller Id Features; Caller Id - Panasonic KX-TDA30 Features Manual

1.17 Caller ID Features

1.17.1 Caller ID

Description
The PBX receives caller information, such as the caller's name and telephone number, through the trunk.
This information can then be shown on the displays of PTs, PSs, or SLTs that support FSK-type Caller ID.
The PBX can modify a received number according to preprogrammed tables, so that an extension user can
easily use the received number to call the caller back. For example, if an area code is not required to call
outside destinations in a certain area, but received Caller ID numbers from that area contain an area code,
it is possible to store that area code in a modification table so that it is deleted automatically from received
numbers (Automatic Caller ID Number Modification).
1.
Features
Caller ID includes the following features:
Caller ID
Calling Line Identification
Presentation (CLIP)
Automatic Number
Identification (ANI) (KX-
TDA100/KX-TDA200 only)
2.
Service Features
Calling Line Identification
(CLI) Distribution
Feature
Caller's information which is sent from
an analogue trunk.
The following Caller ID signalling types are supported: FSK and
DTMF.
Caller's information which is sent from
an ISDN line.
→ 1.20.1.2 Calling/Connected Line Identification Presentation (CLIP/
COLP)
Caller's information which is sent from
an E1 or T1 line.
→ 1.21.1 E1 Line Service (KX-TDA100/KX-TDA200 only)
→ 1.22.1 T1 Line Service (KX-TDA100/KX-TDA200 only)
Features
Directs a DIL/DID/DDI/MSN call to a CLI destination if the caller's
identification (Caller ID/CLIP/ANI) has been assigned to the Caller ID
Table.
→ 1.1.1.5 Calling Line Identification (CLI) Distribution
Description & Reference
Description & Reference
1.17 Caller ID Features
Feature Guide 167