Toro Groundsmaster 3400 Addendum page 3

1. Transmission bypass valve
Note:
The machine is now in a freewheel
condition and can be towed for a short distance
at slow speed.
8. Remove the wheel chocks before towing the
machine.
Returning the Machine
to the Normal Working
Condition
1. Chock the front wheels.
2. Close the bypass valve on the transmission
pump by turning it clockwise.
3. Commission the front wheel motor disc brakes
as follows:
Important:
Check and ensure that no
contamination gets into the motor through
the gap when the end cover has been
released.
A. Using a M6 hex bit and a torque wrench,
torque the end cover bolts in a star cross
pattern to 14 to 16 N∙m (10 to 12 ft-lb); refer
to Figure 2.
B. Ensure that the end cover is flush with the
brake housing.
C. Repeat this procedure for both front wheel
motors.
Figure 4
4. Remove the wheel chocks
5. Disconnect the tow bar.
Note:
The braking system now operates in the
normal way.
g014450
3