Toro Groundsmaster 3400 Addendum page 2

Figure 2
5. The brake will be released when the gap
between the end cover and the brake housing is
approximately 3 mm (0.118 inch); refer to
3.
1. End cover
6. Repeat the above procedure on the left front
wheel motor.
7. Decommission the hydraulic service system
by turning the bypass valve, located under
the transmission pump, counterclockwise, a
maximum of 3 turns
g282316
Note:
when the machine is being towed. The steering
feels stiff as there is no hydraulic assistance
when the engine is shut off.
Figure
2
Figure 3
2. Brake housing
(Figure 4).
The steering must be operated manually
g282317