Table of Contents
Advertisement
b
Installing Fibers
5
Installing E1 Cables
The SP3D, MD1, ML1, and SP3S boards provide the E1 port.
6
Installing STM-1e Cables
SL1DA board
SP3D board
SL1DA board
The CQ1, SL1DA, CSHL, EM6F, EMS6, EG4P,
EX1 and EG4 boards provide the optical port.
NOTE
For information about the wiring sequence of the E1
cables, see the wiring table delivered with the E1
cables or the cable part in the Hardware Description.
For a 1.6 mm ( 0.06 in ) diameter E1 cable, use a type
75-1-1 connector and a 2.5 mm ( 0.098 in ) or 1.7 mm
( 0.067 in ) COAX crimping tool when assembling the
DDF-side connector of the E1 cable.
The CSHL, CQ1, SL1DA board
provides the STM-1e electrical port.
28
Advertisement
Table of Contents
