Table of Contents
Advertisement
2
Installing Ethernet Service Cables
3
Installing XPIC Cables
X-OUT
X-IN
X-OUT
X-IN
NOTE
•The EFP8, EM6T, EM6F, EG4 and EMS6 boards provide
the FE ports.
•The CSHL, EM6T, EM6F, EM6S and EG4 boards provide
the GE electrical ports.
•The Ethernet service port supports the MDI/MDI-X
adaptive function. Therefore, you can assemble either a
crossover cable or a straight-through cable. It is
recommended that you assemble a straight-through cable.
EM6T board
NOTE
The IN port on one XPIC IF board must be connected to the OUT
port on the other XPIC IF board.
26
XPIC IF board
Advertisement
Table of Contents
